The Tenor AS Series offers:
• 2 or 4 Analog line and trunk interfaces
• Up to 4 simultaneous VoIP calls
• Available in MultiPath or Gateway configurations
• Support for external Quintum Call Routing Server*
• Support for external Quintum Tenor Monitor
• Support for external Remote Management Session Server*
• Intelligent MultiPath Call Routing
• Answer and Disconnect Supervision
• IVR/RADIUS AAA Compliant (Multilingual IVR)
• Integrated H.323 gatekeeper and SIP B2BUA for survivability*
A more intelligent way to implement VoIP in remote offices and SOHO environments
The Quintum Tenor® AS Series gives small- to medium-sized businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, and intelligent call routing, and supports QoS all in one solution. With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either a PBX or phone, and the public switched telephone network (PSTN).
More intelligence means greater flexibility.
With its MultiPath Call Routing, the Tenor can intelligently route calls between the PBX, the PSTN, and the IP network, to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. No other VoIP solution can match this flexibility.
More intelligence means easier installation.
With its MultiPath architecture, the Tenor is the only VoIP solution that can be installed without upgrades to the existing voice or data networks.
More intelligence means greater reliability.
The Tenor is designed to pass calls through to the existing voice network in the event of system malfunction – even a total power failure.
More intelligence means less network congestion.
With its PacketSaver™ Technology, the Tenor reduces bandwidth consumption up to 57%, by combining voice packets
from several calls into a single packet to minimize packet overhead.
More intelligence means better management
The Tenor comes with a set of easy-to-use configuration and management tools, including Tenor Configuration Manager (GUI) and Wizard, and the Tenor Monitor that offers realtime monitoring of alarms, call status and CDRs. Tenors can easily be remotely managed behind NAT firewalls utilizing the Tenor Remote Management Session Server.*
* Quintum product purchased separately.
** Not supported in initial software release.
Click Here for Specifications
Click Here for Limited Warranty
Click Here for Support Information
